Performance Demonstration Blocks and Frames |
 |
Performance Demonstration Blocks allow validation of coverage and quick equipment calibration. Eclipse has many varieties of blocks to cover a wide range of plate thickness.
- Blocks are designed to enable mechanical (automated/semi-automated) scanning systems to pass over targets.
- Blocks are suitable for demonstration/validation, confirming techniques.
- Accurately machined selection of targets
- Designed to accommodate PA, TOFD and conventional UT
|
Part Number |
Description |
|
|
| CBK |
Standard Calibration Blocks
Carbon steel block with notch patterns in both top and bottom sides of block. Side targets on right side of block and embedded target on left side.
Standard length = 18”, width = 6” (457 x 152 mm)
| CBK-11007 |
4” (100 mm) thick |
| CBK-11008 |
2” (50 mm) thick |
| CBK-11009 |
1” (25 mm) thick |
| CBK-11010 |
1/2” (12.5 mm) thick |
|
 |
|
| CBK-11007-10-K |
Standard Calibration Block Kit
Steel support plates to hold large scanners true and level for accurate scanning.
Standard length = 34”, width = 18”, height = 5.5”
(863 x 457 x 140 mm)
Includes the following items:
| 1x |
Set of all four Standard Calibration Blocks
(See above) |
| 1x |
Mounting Frame with Spacers for four standard
block thicknesses. |
|
 |
|
| |
|
|
