The ESScanLab positioning platform is designed to complement most manual and semi-automated scanning systems. The platform enables the operator to confidently position and scan most test pieces with superior accuracy, repeatability and speed.
- Highly adaptable for many types of scanning from flat plate to pipe
- Excellent for use in the lab or as a training tool
- Integrates with other Eclipse components
Accessories
- Pipe ID Scanning System
- Linear Guide Scanning System
- Pipe Encoder System
- Precise Component Locating & Positioning System with Taxi Encoder
- Couplant Recovery Tray
 |
|
 |
 |
 |
 |
| ScanLab Basic Package |
ScanLab with Clamping Curved Angled Part |
Clamping Angled Part |
Clamping Flat Part with Optional MPE Taxi Encoder |
Linear Guide Scanning System Kit |
Pipe ID Scanning and Encoding |
|
Part Number |
Description |
|
|
| ESScanLab-Basic |
Precise Component Locating & Positioning System
A set of positioning, clamping and spacing elements that mount to a positioning board tapped 1/4-20 on a 1” spaced grid.
A variety of flat, angled and pipe samples can be securely positioned and clamped in place to allow accurate scanning.
Includes the following elements as standard equipment:
| 1x |
Positioning board 20” x 20” (510 x 510 mm) |
| 22x |
Positioning pillars
(2) 6” (150 mm); (4) - 4” (100 mm)
(8) 2” (50 mm); (8) - 1” (25 mm) |
| 6x |
Positioning blocks with removable rollers |
| 8x |
Holding clamps with thumb screws
(4) - Large
(4) - Small |
| 32x |
Spacer Blocks |
| |
|
All necessary fastening hardware. |
 |
|
| ESScanLab-TE |
Precise Component Locating & Positioning System with Taxi Encoder
The ScanLab-Basic system packaged with the TXPA rolling MPE-Taxi PA encoder system for wedges and transducers.
Includes the following elements as standard equipment:
| 1x |
ScanLab-Basic: Precise Component Locating & Positioning System |
| 1x |
TXPA-K: MPE-Taxi with integrated MPE-3A encoder, 2.5 m (8 ft.) cable |
| 1x |
ADC-MPE3: (specify instrument)-0.4 m (15 in), Adaptor cable to instrument |
|
 |
|
| ESScanLab-LS |
Linear Guide Scanning System Kit
Encoded, Linear Guide Scanning System to be used in conjunction with a ESScanLab-Basic Positioning System.
Guide rails hold the scanning platform and encoder in position for smooth accurate scanning.
Includes the following elements as standard equipment:
| 1x |
Linear Guide Rail, 20" Long |
| 1x |
SASDP100 platform with Standard Link Arm
Set |
| 2x |
MPE-SAT Encoder |
|
 |
|
| ESScanLab-PE |
Pipe Encoder System
Pipe Encoder system to be used in conjunction with ESScanLab-Basic
Recommended for pipe sizes;
OD = Min. 2 in., Max.14 in. nominal
Length = Min. 6 in. (150 mm), Max. 16 in. (406 mm)
| 1x |
Pipe encoder block with wheel
encoder |
| 2x |
Adjustable end rollers. |
|
 |
|
ESScanLab-ID
|
Pipe ID Scanning System for UCPS-1
Downslide scanning and encoding system to be used in conjunction with ESScanLab-Basic Positioning System
| 1x |
Dual downslide rail scanner system |
| 1x |
Pipe encoder block with encoder |
| 2x |
Adjustable end rollers |
|
 |
|
ESScanLab-OTS
ESScanLab-OTP |
Couplant Recovery Tray
Permits the use of recycling pumps for couplant.
The ESScanLab-Basic system and other optional accessories fit inside the tray to prevent spillage of couplant materials.
OTS Stainless steel couplant recovery tray.
Size: 29” x 24” x 5” (L x W x H)
(737 x 610 x 127 mm)
OTP Plastic couplant recovery tray.
Size: 26” x 22” x 4” (L x W x H)
(660 x 559 x 100 mm) |
 |
